Visible Channeled Spectra of a Multilayer Wood Filter

The transmission factor of multilayer Wood filters containing quartz and rutile layers was simulated in order to avoid the experimental trials for obtaining optical filters with predicted transmission. The main refractive indices of uniaxial crystals—quartz and rutile—were interferometrically determined and Cauchy constants were obtained by simulation. The transmission factor of optical devices consisting of quartz and rutile layers was simulated using the Maple Program.     

高氧空位浓度对金红石TiO2导电性能影响的第一性原理研究

采用基于密度泛函理论的平面波超软赝势方法研究了 纯的和不同高氧空位浓度金红石型TiO_2-x (x=0, 0.083, 0.125, 0.167, 0.25)超胞的能带结构分布、态密度分布.同时, 采用局域密度近似+U方法调准了带隙.结果表明, 高氧空位浓度越高, 金红石型TiO₂的最小带隙越变窄、电子有效质量越减小, 自由电子浓度越高, 电子迁移率越低、电导率越低.计算结果与实验结果的变化趋势相符合. 关键词： 高氧空位 2')" href="#">金红石型TiO₂ 电导率 第一性原理     

聚合物泡孔材料为模板的溶胶－凝胶法制备大孔结构二氧化钛陶瓷

Macroporous titania monoliths were prepared via sol-gel method using polymer foam as templates.The poly-mer foam polymerized via concentrated emulsion polymerization was immerged in a solution of titanium(IV)iso-propoxide in 2-propanol,which underwent a sol-gel process.The organic components were subsequently removedby calcination.The effects of various parameters,including the nature of the monomer,the volume fraction of dis-persed phase of the concentrated emulsion,and concentration of the sol-gel solution were investigated.The SEMmicrographs of the macroporous titania monoliths thus obtained showed that the porous structure of the final mate-rial was effectively controllable.     

掺杂二氧化钛纳米管对有机电致发光性能的影响

在聚合物电致发光器件中，通过在不同功能层中掺杂二氧化钛纳米管来改善器件的性能.由于二氧化钛纳米管具有p型传导特性，可以显著增大空穴传输层中载流子的迁移率.由于二氧化钛纳米管在发光层中可以增大发光材料分子的刚性，从而减少无辐射跃迁.当把二氧化钛纳米管掺杂到空穴缓冲层中时，由于其与有机分子的强相互作用，一方面降低了空穴的传导性，同时也减少了界面淬灭发光的缺陷态的产生. 关键词： 二氧化钛纳米管 聚合物电致发光 掺杂     

油乳法制备高效液相色谱氧化钛和钛锆氧化物复合填料

以四氯化钛（TiCl4）和氧氯化锆（ZrOCl2·8H2O）为原料,采用油乳法制备了氧化钛和钛锆氧化物复合色谱填料.制备方法简单,条件易于控制,重现性好.用扫描电镜、X-粉末衍射、氮吸附法等方法研究了这两种氧化物微球的物理化学性质,表明所制得的多孔微球粒径分布窄（4-6μm）,孔径在中孔范围内（TiO5.8nm,TiO2-ZrO2　7.4nm）,机械性能良好（可承受41Mpa压力）,完全满足高效液相色谱的需要.     

Spherical Particles of Zirconia-Titania of Hexagonal Structure from a Neutral Amine Route

Through the sol–gel process, using the so-called neutral amine route, spherical particles of 1:1 zirconia–titania were synthesized from zirconium(IV) and titanium(IV) butoxides as well as 1,12-diaminododecane as precursor species. The obtained product exhibited a hexagonal structure, as determinated by X-ray diffraction data. The obtained material was also characterized by thermogravimetry, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy, and surface area measurements. Despite the release of template molecules on heating, the spherical morphology was retained up to about 1200°C, at which the disruption of the spheres took place.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

光催化-膜分离集成反应器及其应用

 设计了一种新型光催化-陶瓷膜分离集成反应器,在反冲条件下利用此集成反应器进行了甲基橙光催化氧化反应,分别考察了陶瓷膜对光催化剂TiO2微粉的截留率、膜的渗透通量、光催化氧化脱色率以及不同膜分离压力下的光催化反应速率常数. 结果表明,TiO2-甲基橙悬浆液体系中TiO2微粉的截留率可达到99.9%, 经集成反应器完成一个反应周期后甲基橙氧化脱色率达到10%, 光催化氧化脱色效果高于圆柱式反应器.     

在涂层TiO2改性铜催化剂上甲醇脱氢制甲酸甲酯

在常压和２５０℃下，考察了涂层ＴｉＯ２改性铜催化剂上甲醇脱氢生成甲酸甲酯的活性和选择性以及催化剂的稳定性。结果表明，涂层ＴｉＯ２明显提高了铜催化剂的活性和稳定性。在所考察的铜催化剂中，以Ｃｕ／ＴｉＯ２／ＡｌＯ３的催化活性最高，甚至高于离子交换法制备的Ｃｕ（ｅｘ）／ＳｉＯ２催化剂。ＸＰＳ分析表明，Ｃｕ／ＴｉＯ２／ＡｌＯ３中存在着两种化学环境不同的ＣＵ（０），即负载在ｒ－ＡＬＯ３和ＴｉＯ２－Ａｌ２Ｏ３